According to the manual for the Ender 3 3d printer which material(s) are compatible? Select all that apply *
1 point
Required
Which file formats are supported by the Creality slicer for 3d printing?(select all that apply) *
1 point
Required
What is the standard nozzle diamerter of the Ender 3 s1 pro 3d printer?
1 point
Your answer
What distance should the nozzle of the 3d printer be from the bed? *
1 point
Long hair is to be secured by ________ when operating equipment *
1 point
Which of the following is safe to wear when operating machines in the shop: *
1 point
Wrenches or other tools can be used on moving machinery: *
1 point
Horseplay is allowed: *
1 point
Machinery and equipment can only be operated when: *
1 point
In the event of an injury or accident, you should immediately report it to:(check all that apply) *
1 point
Required
Why would ABS be a poor choice to cut with a laser cutter? *
1 point
1/2" polycarbonate is easily cut by the laser cutter. *
1 point
Faulty equipment, or tooling should be: *
1 point
Always stop a machine before___________. *
1 point
Broken tools or cutters should: *
1 point
When you have completed an operation on a machine, turn off the power and wait until the cutting tool has come to a stop before leaving the area or setting up another operation. *
1 point
Never leave a machine running or unattended under any circumstances. *
1 point
If you or someone else is injured while in the lab you should leave before anyone notices. *
1 point
Stopping a work-holding device by hand is an acceptable practice while working on rotating machinery. *
1 point
True or False: The table saw is good at making curved cuts. *
1 point
What is the technical term for the shark fin of a table saw located aft of the blade *
1 point
When using the horizontal band saw it is acceptable to hold the stock to be cut with your hands. *
1 point
Which type of saw is best for long straight cuts in wood? *
1 point
Long deep holes are best drilled using a technique called peck drilling. *
1 point
When using the laser cutters the central vent system should be activated... *
1 point
True or False: The table saw table is a good place to work on projects *
1 point
According to the "table saw safety rules" document the teeth of a table saw blade should be about(___)" above the piece to cut. *
1 point
PVC plastic can be cut with the laser cutter. *
1 point
What type of materials can be ground on a bench/pedestal grinder? *
1 point
Using the suggested drill speed chart: Would a 1/2" drill need to spin faster or slower than a 1/4" drill to maintain the proper SFM? *
1 point
When drilling what is the best way to hold the work piece. *
1 point
When making cross cuts on a table saw which guide would be used? *
1 point
A copy of your responses will be emailed to the address you provided.