Band Saw Safety Exam
Select the best fit answer, "safe" or "unsafe" for the following questions.
Sign in to Google to save your progress. Learn more
1. To have upper and lower band wheels fitted with guards. *
1 point
2. To check adjustment of blade guides before using saw.
1 point
Clear selection
3. To use each blade as long as possible. *
1 point
4. To stand directly behind the line of sawing. *
0 points
5. To allow hands to get within 2" of the blade while in operation. *
1 point
6. To see that upper blade guard and guide clears work by about 1/4 inch. *
0 points
7. To allow blade to run near the outside edge of wheels. *
0 points
8. To use one hand to guide the work and the other to push it into the saw in freehand sawing. *
0 points
9. To stop the band saw by forcing a piece of wood against the blade. *
10. To make turns in any radii. *
11. To "back-out" of curves while saw is running. *
0 points
12. To tilt the table for cutting bevels. *
0 points
13. To use ripping fence for cutting several pieces of wood to the same length. *
0 points
14. To operate at a blade speed of approximately 1000 feet per minute for cutting wood. *
0 points
15. To saw irregular work as near to the line as possible the first time through. *
0 points
Submit
Clear form
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Privacy Policy
Google Forms