Transmission Parts ZF ZF6HP26 ZF6HP28 Internal Bushing

Print Share

Symptoms:

B Clutch burned
Bushing wear
Bushing failure
Ratio codes

Cause:

OE bushing material composition allows premature wear.

Correction:

Install improved Sonnax sun gear shaft bushings to restore critical clearances and resist untimely wear.

Warning:

Caution: Use of an arbor press is required for correct installation. Do not use a hydraulic press or a bushing driver/hammer combination to install, as doing so will distort the bushing and cause fitment issues.

ZF6HP26, ZF6HP28

Sun Gear Shaft Bushing
Part No. 95030-06A

Fits units with .991" (25.17mm) shafts only.

Package Quantity: 6

Find a Distributor

The OE sun gear shaft bushings located at front and rear of the sun gear shaft in ZF6HP26 and ZF6HP28 units have a tendency to wear out prematurely due to sub-optimal material composition. This wear can lead to bushing failure, pressure control codes, and burnt B clutches. Sonnax sun gear shaft bushing 95030-06A features superior wear characteristics, eliminating premature deterioration for worry-free operation. The Sonnax bushing's upgraded material composition outperforms the OE bushing.

Specs