ABCDEF
1
DateRemarks"","
2
9-Oct-11First Edition, thanks to Adrian Black's list of SGII Xgauge.
3
http://priuschat.com/forums/obdii-android-app/98693-geniii-prius-custom-pids-torque-app.html#post1399012
4
29-Jan-12Separated list into US & Metric.
5
Corrected BV+ & BVB, equations were offset by a byte, thanks to frenchie.
6
Corrected bdw & bcw, equations were incorrect, thanks to frenchie.
7
Corrected BtT, BT1, BT2 & BT3, equations were word-size, not byte-size, thanks to Frank T.
8
Added Distance Since Oil Change for U.S.A. (reset), thanks to Adrian Black.
9
Added Disable Traction control, thanks to Adrian Black.
10
Added Set HV Battery Cooling fan speed, thanks to Adrian Black.
11
Added Read HV Battery Cooling fan speed, thanks to Adrian Black.
12
Added Seat Belt Beep Disable/Enable, thanks to Adrian Black.
13
Added Reverse Beep Disable/Enable, thanks to Adrian Black.
14
Added many new PIDs, thanks to the Techstream log file from Paja.
15
2-Feb-12Added more new PIDs for A/C, ABS, Meter, thanks to the Techstream log file from Paja.
16
17-Mar-12Cells shaded with this color are for setting of customizable features, not applicable for other models, use with caution!
17
Only need to run once, can use TEST Button to select the desire PID to run.
18
Cells shaded with this color need to run continuously to work, need to select as a display item.
19
24-Mar-12Added Requested Engine Torque, HV Target Engine Speed, Engine Run Time (Up to 255 sec. only)
20
Added Request Engine Run Time, Judge Time Engine Ignition, Judge Time Engine Output, ISC Learning Value
21
Added Engine Independent Control, Request Warm-up, Racing Operation, Engine Independent
22
Added F/C for Engine Stop Req, ISC Learning.
23
10-Apr-12Change Blower Motor Speed Level scaling, Vehicle Load scaling.
24
14-Apr-12Added Fuel System Status #1, Short FT #1, Long FT #1, IGN Advance.
25
Added Target Air-Fuel Ratio, AF Lambda B1 S1, AFS Voltage B1S1, MIL, Initial Engine Coolant Temp
26
Added Initial Intake Air Temp, Total FT #1, EGR Step Position, Engine Speed of Cyl #1~4, Av Engine Speed of All Cyl.
27
Added Communication with HV, Communication with Brake, Comm with Air Conditioner.
28
Added VVT Aim Angle #1, VVT OCV Duty #1, VVT Change Angle #1, Misfire RPM, Misfire Load.
29
Added Cylinder #1~4 Misfire Count, All Cylinders Misfire Count, Ignition Trig. Count.
30
15-Apr-12Added Model code, Engine Type, Cylinder Number, Destination, Model Year, System Identification.
31
5-May-12Added Deceleration Sensor, Deceleration Sensor2, TRC(TRAC) Ctrl Status, Reservoir Warning SW.
32
Added Steering Angle Sensor, Main Idle SW, Stop Light SW, Parking Brake SW, Stop Light Relay Output.
33
Added ABS Warning Light, Brake Warning Light, Slip Indicator Light, Buzzer, ECB Warning Light, vehicle speed.
34
Added FR Wheel Acceleration, FL Wheel Acceleration, RR Wheel Acceleration, RL Wheel Acceleration.
35
Added Zero Point of Decele, Zero Point of Decele2, Zero Point of Yaw Rate, Zero Point of Steering Angle.
36
Added FR Regenerative Request, FR Regenerative Operation, TRC(TRAC) Engine Ctrl Status, TRC(TRAC) Brake Ctrl Status.
37
Added FR Wheel VSC Ctrl Status, FL Wheel VSC Ctrl Status, RR Wheel VSC Ctrl Status, RL Wheel VSC Ctrl Status.
38
Added FR Wheel ABS Ctrl Status, FL Wheel ABS Ctrl Status, RR Wheel ABS Ctrl Status, RL Wheel ABS Ctrl Status.
39
Added RR Wheel EBD Ctrl Status, RL Wheel EBD Ctrl Status, BA Ctrl Status, PBA Ctrl Status.
40
Added Zero Point of Yaw Rate2, P-Seatbelt Buckle SW, Check Engine SW, Oil Pressure Switch, Vehicle Speed Meter.
41
Added Coolant Temperature, Key Remind Sound.
42
27-Jul-12Corrected Vehicle Speed Meter_7C0 scaling.
43
27-Oct-12Corrected Blk# min & Blk# max with offset of 1.
44
27-Nov-12Corrected Set Temperature (D side).
45
1-Dec-12Corrected Coolant_7C0 scaling.
46
21-Dec-12Corrected HV battery charge control and HV battery discharge control, thanks to usbseawolf2000.
47
29-Dec-12Added CCS Vehicle Spd, CCS Mem Vehicle Spd, Cruise Operation Status, Cruise Control.
48
Added RES/ACC Switch, SET/COAST Switch, Cancel Switch.
49
19-Jan-13Move customize options to a new worksheet because those PIDs got inadventently executed while user scroll through the list.
50
Thanks to Electric Charge for the heads up.
51
http://priuschat.com/threads/geniii-prius-custom-pids-for-torque-app.98693/page-11#post-1722748
52
User should manually enter it using TEST function as suggested by usbseawolf2000.
53
26-Jan-13Coolant Temperature_7C0 corrected with SIGNED() function.
54
28-Nov-13Remove Coolant Temperature_7C0 SIGNED() function, minimum temp. should be 0C/32F.
55
28-Apr-14Thanks to Cave Arnold for spotting the errors.
56
http://priuschat.com/threads/prius-phv-custom-pids-for-torque-android-app.104779/page-9#post-2000539
57
13-Jul-14Added CSV for direct conversion to Torque CSV format.
58
19-Oct-19Deleted all CSV tab.
59
60
61
62
63