AGROTRON TTV 410 • 420 • 430
EVOLVING AGRICULTURE.
POWER EFFICIENCY 40 km / h at ultra low crankshaft speed
The integrated efficiency of all systems.
Separate hydraulic oil tank
The maximum speed can be programmed and is reached with
The hydraulic oil tank, completely independent from the
the motor at low speed. This allows
transmission, allows the oil to be
fuel to be saved.
kept cleaner in the gearbox, increasing the service interval time.
Transmission oil quickly up to operating temperature
eVisco Fan
The cooling circuit of the oil for the
Economy power take-off speeds
gearbox has a thermostatic valve which ensures the operating tempera-
With four power take-off speeds, including two economical ones (540 E / 1,000 E),
ture is reached quickly,
the Agroton TTV 410 / 420 / 430 saves up
even at low temperatures.
to 18 % of fuel when working at PTO.
Load Sensing hydraulic system
The electronically controlled viscostatic fan regulates the flow of cooling air
Hydraulic power only when needed, up to 120 litres / min.
according to the effective requirement. This ensures that fuel is saved in any
Power Brake
given operating situation.
The increase in the distance between brakes and discs (compensated by the
DEUTZ DCR engines
Power Brake) results in less absorption The 16 valve DEUTZ, Common Rail
of power, less wear and tear on the
engines stand out because of their
parts and lower heating of the oil.
reliability, working life, power and low fuel consumption.
Eco / Power mode
Performance can be matched to fuel
POWER EFFICIENCY
consumption or to maximum power output, under any operating conditions.
“Power Efficiency” is the philosophy applied today by DEUTZ-FAHR in designing, improving and developing all its products. Nothing is left to chance: every component, device or system incorporated into
2
DEUTZ-FAHR tractors is designed to optimize efficiency, reduce power demand, minimize energy consumption, increase performance and maximize care for the environment.
Agrotron TTV tractors are a clear example of this philosophy: the integrated efficiency of all systems optimizing the overall performance of the machine and creating added value for the customer.
3
MODERN STYLE, TECHNOLOGICALLY CUTTING EDGE COMPONENTS.
Advantages Modern and functional style Optimum visibility for control of implements and work in hand Running costs always under control
A generously proportioned glass roof hatch, with sunshade, allows excellent visibility when using a front loader.
Design and versatility The aggressive-looking front grille, the modern styling of the hood and the innovative design of the cab on the Agrotron TTV create a stunning visual impact and convey an image of high quality in design. The cutting edge technical characteristics of the Agroton TTV guarantee versatility and adaptability under any work condition: in the large cereal companies where the tractors are used to the maximum of their operating capacity; in breeding of dairy cattle to adapt completely to the operating diversity that characterize these
4
companies (from mowing to preparation of the unifeed). Furthermore, with the front loader for multi-task handling, the Agroton TTVs stand out for their flexibility and comfort. Equipped with modern DEUTZ 2012 series 4-cylinder engines, TTV continuously variable transmission capable of 50 km / h top speed, and a powerful hydraulic system rated 120 l / min, these are machines equal to any challenge. The package is completed by a four speed PDO, and a cab among the most spacious and comfortable in its class. En-
gines of high efficiency ensure low fuel consumption, whatever the type of use. Agrotron TTV 410 / 420 / 430 models are also notable for their low running costs, achieved by virtue of long maintenance intervals and competitively priced original replacement parts. This impacts positively on general operating costs, given that the primary objective is to obtain maximum Return On Investment.
Plunging hood lines and large expanses of glass give excellent all round visibility.
New style for the front, modern and appealing.
Comfort steals the show.
Advantages Entry and exit without obstacles High safety
Driver’s seat with adjustment based on weight and height of the operator
Optimum night vision for control of implements and work in hand. Higher productivity
Uniform distribution of air inside the cab, and complete isolation from dust and pollutants
Drinks always chilled even during the warmest periods and documentation always in order and within reach Cables routed into the cab without opening the rear window; simple and secure connection of external equipment
Twin pairs of lights incorporated at roof level, with extra wide beam provided by 14 powerful halogen lamps (Xenon lamps also available as optional accessory) able to illuminate a cultivation area of 600 m2.
The atmosphere inside Access to the cab is by way of large nonslip galvanized metal steps. Full length handrails fitted to the cab posts and further rails on the insides of the doors provide an easy and comfortable grip. Doors with plenty of height and width create a big opening for ease of access. The volume of the S-Class cab guarantees unparalleled spaciousness. The wraparound driver seat, upholstered in non-slip fabric, has Deluxe air suspension and is proportioned with comfort firmly in mind. The driver seat is also available in an AEROMAT MAXIMO version that represents the ultimate in comfort, guaranteed to make even the bumpiest ride a pleasur-
6
able experience thanks to 11 independent adjustments that can be customized to support different parts of the body. Ventilation system with a powerful 4 speed fan unit rated 580 m3 / h. Air is drawn into the cab from a “neutral” and therefore less dusty area of the exterior, through 2 filters incorporated into the door pillars, then circulated around the cab by way of 14 vents, each adjustable for volume and direction to cater for personal preference and provide notable flexibility of use. The air vents are located at the top of the pillars and posts, so that the temperature in the cab can be regulated swiftly to the required level.
The drinks cooler compartment runs off the air-conditioning system and can hold 1 large bottle (2 litres) + 1 can. The storage compartment has a capacity of 7 dm3 and will accommodate a DIN standard first aid box.
Access point for cables and Power sockets on the same side: 4-pin standard implement connector; external power socket; socket allowing transfer of data between tractor and implement.
The driver’s seat with Deluxe pneumatic suspension is generously sized, the wrap around type, covered in nonslip fabric.
Ventilation system with a powerful installation with 4 speeds and a flow of 580 m³ / h.
The cab is also pressurized internally by the ventilation system, so that whenever the doors are closed, the higher pressure within the enclosure will minimize the risk of exposure to pollen and chemicals. Sound insulation The Agrotron TTV cab is among the quietest on the market, with an internal noise level of just 72 db (A), achieved through high standards of design; a onepiece cab structure, welded and sealed with absolute precision; floor mat made of new sound absorbent and sound insulating materials; lower front window panels with double sealed units. And quieter running engines.
Easy and intuitive use of the tractor.
Advantages Ergonomic design emulating that of road cars
Quick identification of warnings, supported by exact information, ensures that data can be displayed almost instantaneously
Swift adaptation to different driving conditions
The most frequently used controls are located to the right of the driver
5 12
6
4
8
3
15
9 2
1 2 3 4 5 6
16
10 1
Rev counter (tachometer) Fuel level Engine temperature Warning and indicator lamps Digital display Warning and indicator lamps
Anyone looking to work smoothly and productively needs to have complete ease of movement, and a logical sequence of controls. The controls of the Agrotron TTV have no hidden secrets. The driver can understand quickly how everything works, with no special instructions needed. All the levers and switches are easily identifiable, thanks to their different shape and colouring, and grouped together clearly and logically on a console to the right of the driving position, located within functional groups according to their frequency of use. All the instrumentation is positioned within the driver’s direct line of vision. Accordingly, the driving position has been optimized, with the controls safe and logical, allowing the driver to produce a higher work rate. The steering wheel is infinitely adjustable for height and for / aft tilt, by means of a gas spring mechanism. The steering
8
13
14
7
11
7 8 9 10 11 12
Operating hours counter Travelling speed Speed of front PTO Speed of rear PTO Wheel Slip Pre-selected speed
wheel itself is covered in non-slip material and proportioned to give optimum grip. Controls mounted to the steering column include two levers, one incorporating washer and wiper controls for the front and rear windscreens, and another with switches for the road lights, direction indicators and horn, and a shuttle lever (FWD / REV). Infocenter Simple but comprehensively efficient, this provides all the information needed to control the tractor and monitor productivity. Area with analogue indicators: for quick and detailed operating information of the tractor; “signal lights” area: indicating the current status of the tractor; digital displays + performance monitor: information relating to the use of the transmission and PTOs, and to productivity. The instrumentation also provides information on maintenance intervals, sequential pro-
17
13 14 15 16 17
Direction of travel forwards / reverse Speed increase indicator Cruise Control indication Driving mode Travelling speed
gramming of repetitive operations – Comforttip – and displays the speed of the rear PTO (and the front PTO if installed). Emergency conditions are indicated by a special warning light and an audible signal. Clear and reliable display of information is assured, even in bright weather conditions, by a non-reflective glass. A display mounted to the right hand post of the S-Class cab provides the driver with a quick overview of the vehicle’s speed, and the main transmission parameters, namely: selected speed settings, actual speed, Cruise Control and driving mode.
9
Ready to go straight away.
Advantages No oscillation of the PowerComV lever relative to the driver, ensuring easy selection and operation of the various controls even when operating on rough terrain
Faster sequential operation of controls: no need to reach for levers and switches located in different parts of the cab
Maximum ergonomic advantage, even varying the position of the driver seat
30
25
5 23 3
4
22
12
Today, it is almost impossible to operate a modern hi-tech tractor without the aid of endless explanations and instructions. In an effort to overcome these difficulties, DEUTZ-FAHR engineers have concentrated on the functionality of the tractor, and ease of use. The ergonomic PowerComV multifunction joystick can be used to control all the frequently used functions of the tractor: acceleration, deceleration, rear hitch lift controls, auxiliary spool valves and power shuttle. Due to the introduction of this lever, all operations and checks can be performed with one hand only. The advantages are numerous – time saving, safety, quicker reactiontime during operation – as the controls respond almost immediately. And with Cruise Control, a chosen ground speed can be selected and maintained in any operating conditions.
26
24
31
32 6
28
10
1
29
11
33 2
Multifunction armrest All the important controls used for activation of the electronic spool valves, automatic traction control (Axle System Management), electronic engine management (EMC) and hand throttle are incorporated into the right armrest. Switches and controls are arranged on the basis of priority, and easily identifiable by their different shape and colour. The multifunction armrest is adjustable to suit the needs and preferences of the operator.
9 16
18
13
14
7
8
1 PowerComV joystick 2 Cruise Control 3 Powershuttle buttons 4 Electrohydraulic control, auxiliary spool valve 1 5 Electrohydraulic control, auxiliary spool valve 2 6 Lift Up / Down / Quick drop, EHR (electronic hitch) activation 7 Electronic engine management
21
15
27
8 Electronic hand throttlett 9 Transmissionneutral 10 Differential lock 11 Four wheel drive engagement 12 Joystick, spool valves 3 and 4 13 Automatic control of 4WD and differential lock functions 14 Engage / disengage front axle suspension
15 Transmission mode management automatic / manual / PTO 16 Acceleration rate 17 ECO / Power mode management 18 Timer (spool valves 1 and 2) 19 Flow control valve (spool valves 1 and 2) 20 Flow control valve (spool valves 3 and 4) 21 Tractor parameters configuration
17
19
22 PTO speed selection lever Eco / normal and 540 / 1,000 rpm 23 Auto PTO engage / disengage 24 Rear PTO selection and enable 25 Front PTO selection and enable 26 Lock / release spool valves 27 Enable button 28 Ground speed control
20
29 Comfortip: repetitive operations memory function 30 iMonitor 31 iMonitor thumbwheel 32 iMonitor memory button console 33 Proportional electrohydraulic controls, spool valves 5-6-7
11
INTEGRATED SUSPENSION.
Advantages Superior comfort on the road Fast reaction No swaying or pitching movement when using a front loader Components unaffected by wear and maintenance-free
No limitation of spring action even with maximum axle oscillation
Noteable reduction of vibrations felt by the driver
Streamlined and compact structure with no limitation of steering angle and turning circle
Automatic adjustment of suspension to suit different loads and conditions
Systems compared
AGROTON TTV OFFERS THE MAXIMUM DRIVING COMFORT EVEN AT 50* KM / H THANKS TO THE INTEGRATED SUSPENSIONS SYSTEM.
Suspension: systems compared 100 %
…without suspension 86 % Unparalleled driving comfort guaranteed by the exclusive pneumatic cab suspension.
Hydraulic cylinder …front axle suspension 67 %
Position sensor Rocker arm Front axle
…cab suspension 60 %
Swing angle of axle 22° Suspension travel ± 45 mm …suspension of front axle and cab
* Depending on the national standards.
12
Front axle suspension The electronically controlled front axle suspension system has been developed adopting an innovative approach. Characteristic parameters such as the steering angle and the oscillation movement of the front angle remain unchanged. Engineering solutions introduced: two hydraulic cylinders, a specially designed trunnion mounting and three nitrogen filled dampers combine to give superior driving comfort and ride stability, even at high speeds and over rough terrain. The electronic control system ensures that the suspension is always maintained at the optimum
Nitrogen shock absorber
Hydropneumatic front axle suspension.
level, regardless of the load on the front end of the machine, by exploiting the full travel of the dampers. When traction is more important than comfort, the suspension system can be deactivated to lock the front axle ‘rigid’, for increased grip. Pneumatic cab suspension The cab is equipped with a self-adjusting and effective pneumatic suspension system. Compressed air is pumped automatically into the pneumatic springs according to the weight carried by the cab, keeping the suspension at the optimum level by utilising the full travel of the
springs. With variations in the load on the cab (different size operators) detected by a position sensor, the system automatically adjusts and stabilizes the travel of the suspension. Two hydraulic dampers absorb any bouncing movement of the cab – even the most extreme – with the pitch and roll cancelled out by a Panhard rod. The basis of a unique experience The combined effect of a suspended cab and a suspended front axle is to optimize performance and comfort even when travelling fast over rough terrain.
13
Little details, important solutions.
Advantages ASM – ultra safe operation, with wheels transferring drive power to the ground Simplicity, ease of use, fast programming of single control functions
Settings suitable for ANY operating conditions, with 3 transmission control modes, and lower fuel consumption achieved by achieving optimum crankshaft speeds
Less operator fatigue Better concentration on working operation
A simple pushbutton activates the programmed cruise speed.
A button and two dials on the multifunction armrest are used to activate and control the various driving strategies, combining transmission and engine settings to best advantage.
During arable cultivation, a number of single operations will be performed on the completion of one pass and before the start of the next. This requires the operator to repeatedly perform sequences of various commands which takes greater concentration with the possibility of mistakes. The Agrotron TTV 410 / 420 / 430 range features a number of functions allowing the user to memorize, retrieve and automate these repetitive operations. Axle System Management (ASM) This is an electronic system, activated by a button on the multifunction armrest, which manages the 4WD and differential lock functions automatically dependent
14
on speed and steering angle parameters monitored and processed by a set of sensors and an electronic control unit. On models equipped with wheelslip control, the ASM system will lock the differentials automatically whenever wheelslip exceeds 25 %. Comforttip (Sequential programming of repetitive operations) To simplify repetitive control operations, the on-board computer allows the operator to save and retrieve a set sequence of commands. Up to 16 operations can be stored in sequence and retrieved. Shifting the PowerComV lever to the left, the operator can either program or retrieve a
sequence of operations, thereby reducing the repetitive tasks performed when making headland turns to a single movement. The selected operations are programmed quickly and simply, in just 3 easy steps. Press the activation button in front of the lever and simultaneously push the lever to the left, holding for at least 3 seconds. Having decided on the sequence of operations the tractor is to perform, the user simply presses the buttons of the corresponding functions on the multifunction armrest. A window on the Infocenter instrument panel displays the icons of the selected functions in the sequence they have been entered. To confirm the selection and exit programming mode, the driv-
er simply presses the enable button and shifts the lever momentarily to the left. To activate the Comforttip function, the driver presses the enable button and shifts the lever momentarily to the left. The sequence will start from the first function programmed. During operation, the operator can scroll through the steps of the programmed sequence to move to the next simply by moving the lever repeatedly to the left. When Comforttip mode is active, other functions can be operated manually.
Forward speed
Deactivate Cruise Control
Lift the plough
Lower plough
Recall the memorized engine working speed
Turn the plough (Control valve 1)
Activate Cruise Control
Deactivate memorized engine working speed
Engage reverse gear
Every function of the Comfortip in sight.
Essence of power.
Advantages deutz Common Rail euro 3 engines, 4 cylinders, 16 valves, turbo intercooler, with electronic regulator and external recirculation system of the exhaust gases
The DCR (Deutz Common Rail) fuel injection system operates at pressures up to 1.600 bar and is fitted with two wet pumps
The exhaust gas recirculation system optimizes fuel consumption and minimizes emissions 100 % compatible with biodiesel fuel (B100)
The 16 valve distribution permits a perfect filling of the cylinder and an optimization of the air-diesel oil mixture.
Fuel consumption
Low fuel consumption Fuel consumption reduced by 12 %
+ Conventional engine
DEUTZ-engine
39 %
-
DR
IV
16
DIES
TZ
VE
EL
50
SA
The electronic control viscostatic fan (E-Visco-fan) operates at variable speeds depending on the temperatures and the loads. It is a low energy consumption system which is activated only when needed.
E DEU
With their DEUTZ engines, Agrotron TTV 410 / 420 /430 models are able to economize on fuel from the very first hour of operation, through a combination of features: torque maintained across a broad range of crankshaft speeds, economy mode (40 km / h at 1,400 rpm), DEUTZ Common Rail (DCR) fuel system, four valves per cylinder, external EGR (exhaust gas recirculation), turbocharge with intercooler, high pressure electronic fuel injection, and fuel cooler. These are some of the main characteristics of the turbo diesel 4 cylinder engines of the new Agroton ttv 410 / 420 / 430. Thanks to the new fuel injection system, utilizing two wet pumps (immersed in the engine oil) and combustion chambers with new geometry, engines of the 2012 series guarantee high performance even in the trickiest
44 %
+
Total efficiency
An engine delivering constantly high torque is exceptionally flexible in operation, and generates maximum traction even when working with power-hungry implements in tough conditions.
traction conditions. The electronic injection system, generating pressures of up to 1,600 bar, ensures rapid response and high torque rise even at low crankshaft speeds With rated horsepowers of 114 HP / 84 kW (TTV 410), 124 HP / 91 kW (TTV 420) and 134 HP / 98,5 kW (TTV 430), Agrotron TTV tractors are the ideal multipurpose machines for agricultural businesses and contractors. With 16-valve timing, the cylinder fills perfectly on the intake stroke, and blending of the fuel-air mixture is optimized. Moreover, the design of the cylinder head is such that the injector can be positioned centrally and vertically, directing fuel onto the central area of the piston where ignition typically occurs, optimizing power and fuel consumption. The engines of the TTV range are equipped with an elec-
tronically controlled viscostatic cooling fan that operates at variable speed, dictated by temperature and load conditions. The speed of rotation of the fan is controlled by a viscous coupling, interlocked to an electronic system that guarantees quick reaction times, so that the flow of cooling air can be proportioned to the effective requirement. As a result, the working temperature of the engine coolant can be kept within an optimum range of values, the engine is protected more reliably from overheating, and the right amount of air is supplied to all radiators and coolers, thereby reducing the power demand from the fan and consequently helping to minimize fuel consumption.
17
Total control of efficiency and speed.
Advantages High level of economy, with maximum efficiency assured in all four speed ranges Ease of control and immediate adaptability
Longer service life, thanks to the use of oil-immersed multidisc clutches absorbing minimal power
Maximum effectiveness, due to the predominantly mechanical operating characteristic of the transmission
Dependability and durability
DRI
STO P
VE
With the PowerZero function, the tractor can be held stationary on any terrain, regardless of gradient and load conditions.
50 Ideal combination. The variable displacement pump of the hydrostatic unit is driven directly by the engine, and with the combination of hydrostatic motor, four speed ranges and electronic management, maximum efficiency is assured.
There are numerous transmissions by which power can be transferred from an engine to the wheels of a vehicle through a variable speed drive. In the majority of cases, there are two main factors that differentiate one system from another: the electronics utilized, and the overall efficiency – reflected in the extent to which the hydrostatic or mechanical component predominates. The transmission of the Agrotron TTV 410 / 420 / 430 range achieves new goals in the technology applied to continuously variable sys-
18
tems. In effect, electronic management provides the user with different driving strategies: automatic, PTO and manual, with efficiency optimized by the interaction between engine, sensors and control software, according to the traction force required. Operating the continuously variable transmission of Agrotron TTV models, within each operating range, the transmission reaches a speed ratio at which the hydrostatic power component is reduced to zero, leaving the mechanical transmission component to take over
entirely. There is a greater emphasis on the “mechanical” transmission which results in higher efficiency especially in jobs that require high traction capacity. The 4 ranges are designed to optimize efficiency at different operating speeds. A typical example is that of heavy tillage, whether subsoiling and deep ploughing (with the tractor proceeding at a speed of between 3 and 5 km / h), or “traditional” ploughing (at ground speeds of between 5 and 9 km / h), where the machine has to operate at full power for long periods of time. Only mini-
mal hydrostatic power is utilized, which results in increased tractor performance. Operation is simple. The mechanical and hydrostatic components comprises of an epicyclic speed reducer and a hydrostatic drive, assembled in a configuration of meticulously engineered design. The speed reducer is made up of four distinct epicyclic gear trains, each ensuring continuity within a specific speed range. The variable displacement pump of the hydrostatic unit, driven directly by the engine,
determines the speed of the hydraulic motor and consequently the speed of the tractor, which varies steplessly. The combined operation of the four gear trains, coupled through oil immersed clutches, enables the transmission to shift from one speed range to another without no break in continuity, optimizing productivity. The progression from 0 to 50 km / h is seamless, with the optimum gear ratio selected at every stage.
PowerZero With the engine running and Automatic or PTO mode selected, the PowerZero (active stop) function will also come into operation: the transmission holds the tractor stationary without any need to apply the parking brake, even with the engine idling, and independent of gradient or load factors.
19
4-speed PTO: exceptional value.
The PTO mode of the transmission is automatically activated when the pto is engaged.
Advantages High efficiency with lower fuel consumption 4-speed rear PTO for increased versatility
Interchangeable flange-mounted PTO shaft, allowing easy changeover to implements with different splines
Modulated start, contributing to longer life of components
In PTO auto mode, the rear power take-off is deactivated the moment the rear lift comes into operation.
Consumption g / kWh
1,000 1,000 E
1,400
-18 %
1,600 1,800 Speed [rpm]
2,000
With economy PTO available, the Agrotron can operate within a speed band optimized to minimize energy consumption.
The hallmark of Agrotron TTV 410 / 420 / 430 tractors is versatility. With four rear PTO speeds (540 / 540 E; 1,000 / 1,000 E) and the option of independent ground speed PTO, adaptability to every kind of implement is assured. The PTO is engaged by an oil-immersed multidisc clutch, electrohydraulically operated with modulation control, which guarantees maximum reliability even when using implements with a high torque demand. It is also generously proportioned,
20
The PTO speed is easily changed by operating the yellow lever to the right of the driving position.
to absorb the peak loads generated by demanding implements without difficulty. The electrohydraulic PTO clutch control is located on the console to the right of the driver, and duplicated on both rear fenders. The clutch can be operated either manually or using the automatic control, which engages and disengages the PTO according to the height of the implement. Economy PTO speeds (540 E and 1,000 E, obtained at low engine revolutions) can be selected when using PTO-driven implements with a medium-low power demand
– which in practice are the majority. Economy speeds give good performance and use less fuel, as well as generating lower noise levels and less stresses. Powerful front PTO The front power take-off (optional), driven directly from the engine and operating at a speed of 1,000 rpm, is activated electrohydraulically at the touch of a button. The front PTO operates independently of the rear PTO.
21
Smart hydraulic power.
Hydraulic power delivered as and when needed, by an intelligent Load Sensing system. The clever part is the introduction of a separate hydraulic oil tank holding 50 litres. Up to 36 litres can be drawn at any one time. This additional tank, which is entirely independent of the transmission, supplies oil to the lift and the auxiliary spool valves and has its own filtration system. When using implements equipped with complex control circuits and increasingly high oil flow demands, Agrotron TTV 410 / 420 / 430 models are equipped
22
with a hydraulic system rated 120 l / min that can accommodate up to 7 auxiliary spool valves (5 rear + 2 front). The spool valves all incorporate flow control and timer functions, and are operated by a combination of pushbuttons on the PowerComV lever, a joystick on the multifunction armrest, and thumbwheels on the side console. With Load Sensing, hydraulic power generated by the system is adapted continuously to the required demand; the oil flow rate can be proportioned, continuously if required, in such a way as to maintain a steady
operating pressure. In practice, the variable displacement hydraulic pump supplies only the amount of oil actually needed at any given time, with the result that less power is wasted and hydraulic components last longer. The external ports are specified with push-pull type quick couplers, so that oil lines can be connected under pressure. A special container collects any oil that may drip from the couplers when the hoses of implements are attached and removed.
Advantages Simple and effective controls Quick and continuous adaptation to different types of soil / implements sensitive response, even to minimal variations in load
High lifting capacity The electronic rear lift with radar ensures accurate and automatic control of hitched implements through continuous analysis of input data from sensors. During transport at high speed carrying heavy implements, there is always the risk of strong swaying motion that could jeopardize the comfort and safety of the ride. The electronic lift of Agrotron TTV tractors incorporates an oscillation damping system that comes into operation at speeds above 8 km / h. Lifting capacity 6,200 kg.
High efficiency, favouring lower fuel consumption Oil supplied as and when needed Easy hitching and unhitching in any conditions
Rear end of the tractor kept permanently clean – no spillage of oil signifying greater care for the environment
Maximum practical convenience in controlling the main functions of the auxiliary spool valves.
Multifunction joystick with integrated hitch controls.
Lift movements and settings are selected from a side console and indicated by a digital display on the main instrument panel, in which the driver can view the various operating parameters.
Up to 7 hydraulic spool valves with a total of 10 rear ports and 2 front ports, plus control of the front lift.
Electronic hitch control All Agrotron TTV tractors are equipped with the EHR electronic lift providing draft, position, mix and wheelslip control. Whenever the lift is activated, the system automatically runs an auto-test procedure using an integrated diagnostics program. The basic setting for the EHR system is easily accomplished by way of a control unit that will automatically check out the following functions: draft control and position control, ‘mix’ control, quick drop, float, wheelslip, oscillation damping, transport lock,
maximum lift height and rate-of-drop. The control used to operate the rear lift is incorporated into the PowerComV lever.
23
A REAL CONTROL TERMINAL.
Advantages Display easy to read in all light conditions
Easily updated software
Built-in Mp3 Player
Clear and informative graphics
Thumbwheel control similar to those found in cars
Built-in FM / AM radio
Simple symbols, immediately understandable
An innovative control system For maximum control and the customization of various functions, it is possible to equip the ttv with the monitor, the innovative multimedia interface (ISOBUS compatible) easy and intuitive. The following functions are integrated: main menu
24
controlling all machine functions (lift, PTO, spool valves, engine and transmission, ASM and cab suspension); performance monitor (fuel consumption, productivity and area-tillage information); ISOBUS monitor allowing the use of ISOBUS compatible implements; MP3 player and bluetooth
hands-free speakerphone. The iMonitor is operated by way of a Multicontroller with a dial that is pressed and turned to scroll the individual tractor menus where they can be set and / or checked by the operator. This kind of control features the same operating principle as used by leading auto-
Main menu always readily accessible
CCTV camera displaying work area to the rear
All the main functions are grouped together in the opening menu.
Thanks to the monitor, the management of the comfort tip allows up to 32 operations to be set and 100 different sequences to be stored.
With the control panel located on a console to the right of the driving position, the operator can navigate easily through the menus using the dial.
Power socket on the same side as the cable access point, and data transmission socket for dialogue between tractor and implements.
mobile makers for navigation systems and other similar menu-driven devices. Easy to see, and easy to understand. An attractive graphic display on a black screen creates a reassuring sense of order and clarity, and uses conventional symbols to ensure that users can quickly familiarize themselves
and gain expertise with the instrument. Among the many practical advantages is that the operator’s forearm can remain comfortably positioned on the armrest. This eliminates errors attributable to involuntary hand movements when driving. For the first time, a tractor equipped with
hands-free bluetooth, MP3 player, radio and automatic CCTV reversing camera: features available hitherto only on other vehicles. The iMonitor can also be used for appliances controlled by ISOBUS commands, which means that the operator need keep an eye on one terminal only.
25
Agrotron TTV tractors and safety in operation.
Advantages Slick steering action, even with heavy front-end loading and low engine revolutions
Excellent driving comfort
Tight turning circles
Longer component life and no wear
High braking power, with pedal effort applied proportionally and progressively
Maximum safety assured by dependable braking power on gradients, even with heavy mounted implements
Superior handling
The TrailerStretch function, activated by a button in the cab, allows you to have a dual braking (transmission + brakes) in “Auto” mode.
DR
IV
26
DIES
TZ
VE
EL
50
SA
The trunnion mount creates a fulcrum coinciding with the centre line of the axle, allowing an oscillation of 22° at either end to negotiate even the roughest terrain.
E DEU
The original front axle, compact engine and tapered lines of the side panels combine to guarantee a tight turning circle, with a steering angle of 55 °. The hydrostatic power steering has its own independent hydraulic circuit with a 37 l / min pump and 2 powerful double acting steering rams, ensuring a light touch even at low engine revolutions. The Power Brake ensures that minimal effort applied by the operator when depressing the brake
The new Power Brake braking system allows the operator to press the brake pedals with minimum effort obtaining an immediate, powerful and modulable response, even with the engine off.
pedal will produce an instant, powerful and controllable response, thanks to the constant pressure characteristic of the hydraulic circuit. The Power Brake system also includes an auxiliary accumulator for emergency situations, which will guarantee up to 10 brake applications in complete safety, even without the engine running. With an increased distance between brakes and discs (compensated by the servo), there is less power absorbed,
less wear on parts, and less risk of the oil overheating. Brake system utilizing oil-immersed discs on all 4 drive wheels (all-wheel braking optional). Hydrostatic operation produces a braking action proportional to the effort exerted on the pedals, so that braking force can be applied with maximum precision.
27
Accessories for improving productivity.
2
3
4
5
6
7
8
9
10
Whilst the standard equipment packages supplied with tractors of the Agrotron TTV range are generous, they can be enhanced with further options, designed to increase productivity and make life even easier for the operator. 1 Front-end loader: Option of fitting a front loader and extending the versatility of the Agrotron TTV.
2, 3, 4 Trailer hitch brackets: Types of towing bracket specified for different markets. 5, 6 Ballast: Option of increased front ballasting depending on the needs. 7 Agrosky: Availability of Agrosky satellite systems with processing procession from 2 to 30 cm.
8 The rear video camera: Provides for totally safe manoeuvering. 9 ISOBUS: The ISOBUS connection allows all the compatible equipment to be connected quickly. 10 Front hitch: The front hitch with integrated PTO expands the ability of the TTVs for all combined operations.
29
28 1
QUICK and simple maintenance.
Advantages Long maintenance intervals Ease of access, with no tools required Low maintenance costs
1
Quick and simple maintenance Maintenance operations are carried out quickly and with ease, due to the one-piece hood hinged at the rear, which can be raised to completely expose the engine compartment. The hood is held safely in the open position by special gas-filled struts. All the important components and assemblies are easily accessible for the purposes of routine
30
maintenance, with no tools required. The engine oil level can be checked without opening the hood, and a sight glass indicates the level of oil in the transmission housing. Long maintenance intervals The engine oil need only be changed after every 500 hours operation, and the valves serviced every 1,500 hours.
1 Maintenance of the cooling system is straightforward, as all radiators and coolers are mounted on hinge pivots to swing open. 2 The engine air cleaner is serviced easily and in minutes.
3 All fuses and relays are located in a dedicated housing on the right inner fender, easily accessible and well protected. 4 The cab air filters are incorporated into the door pillars for ease of access and servicing, with no tools required.
2
3
4
5
6
7
8
5 The battery disconnect allows the tractor to be stored safely, for long periods of time. Less risk of skidding and as a result less overheating.
7 Checking and topping up the engine oil is quick and simple. 8 The external sight glass allows a rapid and accurate inspection of the oil level.
6 The air compressor is coupled directly to the engine. No interconnecting drive belt, for greater reliability in operation.
31
TECHNICAL DATA.
Type
TTV 410
TTV 420
TTV 430
Engine
n° / cc
TCD 2012 L04 4V DCR
TCD 2012 L04 4V DCR
TCD 2012 L04 4V DCR
4 / 4,038
4 / 4,038
4 / 4,038
Turbo Intercooler Aspiration Max. homologated power
Standard kW / hp
84 / 114.2
91 / 123.8
98,5 / 134
Nm / Kgm
519 / 52.9
563,9 / 57.5
610,5 / 62.3
rpm
1,500
1,500
1,400
Torque increase
%
26.4
26.62
26.61
Minimum speed
rpm
Maximum power engine speed Maximum speed (nominal)
Maximum torque Maximum torque speed
TTV 410
TTV 420
Front PTO
Optional
Oil-immersed multi-plate clutch with electro-hydraulic control
Standard
Shaft diameter
1” 3 / 8
PTO shaft splines
6
Front axle Electrohydraulic control of front and rear differential lock
Standard
750
Automatic traction and differential control
Standard
rpm
1,900
1.3548
rpm
2,100
Transmission ratio: front wheel revolutions for each rear wheel revolution Steering front fenders
Optional
Electronic engine regulator
Standard
Liquid cooled
Standard
Heat exchanger
Standard
Fuel radiator
Standard
Air cleaner with dust ejector
Standard
Silencer with exhaust on cab pillar
Standard
Clutch Electro-hydraulically controlled clutch
Standard
Brakes Integral braking on all four wheels (4WD)
Optional
Parking brake
Standard
Hydraulic trailer braking valve
Optional
Steering Hydrostatic with tilt adjustable telescopic steering wheel Pump capacity
Standard l / min
37
Rear hydraulic lift
Transmission Electro-hydraulically controlled shuttle
Standard
Electrohydraulically controlled rear lift
Standard
Forced lubrication
Standard
Right hand lifting rod and mechanical top link
Standard
Oil cooler
Standard
Auto hitch link arms
Standard
Continuously variable transmission
Standard
Fender controls
Standard
Hydraulic top link
Optional
Rear PTO Oil-immersed multi-plate clutch with electrohydraulic control
Standard
Shaft diameter
1” 3 / 8
PTO shaft splines
6 / 21
PTO 540
rpm
1.996
PTO 540 ECO
rpm
1.543
PTO 1.000
rpm
1.946
PTO 1.000 ECO
rpm
1.512
Groundspeed PTO (tyres)
rpm
Standard
Control on fender
32
TTV 430
Front PTO
Engine model Cylinders / Cylinder capacity
Type
Maximum lifting capacity
kg
6,200
Standard
33
TECHNICAL DATA.
DATI TECNICI 1.2 - DIMENSIONI, PESI E VELOCITÀ DEL TRATTORE 1.2.1 - Dimensioni e pesi del trattore PERICOLO
Type
TTV 410
TTV 420
TTV 430
Front lift
D
Mechanical front lift with folding link arms
Optional C
Maximum lifting capacity
kg
Quick couplers
3,600 Optional
Remote control valves Pump output at max. power engine rpm
l / min
Remote control valves - max. n° of ways Operating pressure
120 E
10 bar
2210
A
B
Electrical system Voltage
V
12
Type
Battery, standard
V / Ah / A
12 / 143 / 660
Tyres
Battery for cold climates
V / Ah / A
12 / 180 / 800
With front tyres
14 / 150
With rear tyres
Alternator Starter motor
V / Ah V / kW
12 / 4
Auxiliary power socket
Standard
Supplementary power socket.
Standard
Fuel tank Tank capacity
Wheelbase (A) Length (B)
210
AGROTRON TTV 410 PNEUMATICI Con pneumatici anteriori Con pneumatici posteriori
Passo (A) mm Min-max width (D)
Cab with pneumatic suspension
Standard
Ventilation and heating
Standard
A VUOTO [2] Unladen weight onMASSA front axle
Standard
Massa a vuoto anteriore Kg. Unladen weight on rearaaxle Massa vuoto posteriore Kg. Massa a vuoto totale Kg.
Air conditioning Hazardous substances protection category CAB
2
Total unladen weight
AGROTRON TTV 420
kg kg
480/70R28”
2,899 - 3,054 2419 4280-4544 2899-3054 2068-2550 430-485
2419 2,068 - 2,550
4280-4544
2899-3054 430 - 485
2068-2550 430-485
1,688 - 2,235 1688-2235 3006-3090 4693-5325
1688-2235
3,0063006-3090 - 3,090
4693-5325
4,693 - 5,325
MASSA MASSIMA AMMISSIBILE A 40 KM/H [1]
Maximum permissible weight at 40 km / h*
Massa massima ammissibile 3800 anteriore Kg. on front axle Maximum permissible weight Massa massima ammissibile 5450-6600 Maximum permissible weight posteriore Kg. on rear axle Massa massima ammissibile totale 8500 Total maximum permissible weight Kg.
3800
kg kg kg
AGROTRON TTV 430
4,280 - 4,544 580/70R38”
kg 1688-2235 3006-3090 4693-5325
580 / 70 R 38”
2,419 480/70R28” 580/70R38”
mm 2419 4280-4544 2899-3054 mm 2068-2550 430-485
TTV 430
480 / 70 R 28”
mm 480/70R28” 580/70R38” mm
DIMENSIONI
Lunghezza (B) mm Ground clearanceAltezza (E) ( C) mm Larghezza min-max (D) Unladen weight**Luce libera da terra (F) mm
Cab / ROPS
TTV 420
Fig. 1 - Schema delle dimensioni del trattore Tab. 2 - Dati tecnici
Dimensions
Height (C) l
TTV 410
3800
3,800
5450-6600 8500
5450-6600
5,450 - 6,600 8,500
8750-9000
8,750 - 9,000
MASSA MASSIMA AMMISSIBILE A 10 KM/H [1] Maximum permissible weight at 10 km / h* Massa weight massimaonammissibile Maximum permissible front axle anteriore Kg.
5500
kg
Maximum permissible weight on rear axle
kg
Total maximum permissible weight
kg
5500
5500 5,500
4,950 - 6,600 1-5 7,950 - 9,000
7,950 - 8,500
Maximum permissible weight at 50 km / h*
34
307.T.0680.it.6.00.indb 5 Maximum permissible weight on front axle
kg
3,800
Maximum permissible weight on rear axle
kg
4,950 - 6,600
Total maximum permissible weight
kg
7,950 - 8,500
* The maximum permissible weights require the standard track width. ** The unladen weight of the tractor is an approximate value as it varies according to the equipment level and accessories installed; the exact weight should determined by weighing the tractor. Continuously variable transmission with speed electronically limited to 40 km / h or 50 km / h.
6/20/2011 3:27:03 PM
7,950 - 9,000
35
SURE AND SAFE WITH ORIGINAL DEUTZ-FAHR service and parts. Original service is wise. Only your DEUTZ-FAHR specialist dealer knows your tractor inside and out. Only your dealer has regularly trained mechanics and experts on call. Only dealers have the special tools and diagnostic equipment required for competent diagnosis and inspection. All this gives you peace of mind – without doubt. Original parts make good sense. As you placed your trust in the original tractor, we recommend you use original parts when required. Only these comply with the high quality and safety standards of DEUTZ-FAHR and ensure correct function and operation without problems – guaranteed. DEUTZ-FAHR lubricants. We recommend genuine DEUTZ-FAHR lubricants. The outstanding quality of this product range, which is made exclusively for DEUTZ-FAHR, ensures that your tractor always receives exactly what it needs.
www.trio-b.com SDFL301-011
Your DEUTZ-FAHR dealer will be pleased to answer your questions:
This printed material is designed for international use. The illustrations it contains show both special equipment and incomplete standard equipment. The availability of some illustrated models, standard and special equipment can vary from country to country. Only the dealer‘s price list stipulates whether such illustrated equipment is included as a standard feature or whether it is a special accessory. In addition the illustrated mounted implements and special accessories may not always comply with the respective statutory regulations. It is the responsibility of the customer – after consultation with the dealer – to verify this, taking the operating instructions into account. All information and illustrations in this brochure are subject to correction; errors excepted. Furthermore all information contained in this brochure is not binding and is subject to modifications of a technical and commercial nature or those resulting from statutory regulations. No claims whatsoever can be derived from these. SAME DEUTZ-FAHR DEUTSCHLAND GmbH reserves the right to make any changes to the design and technical construction and also the scope of standard equipment at any time and without prior notice. 308.8554.3.4
SAME DEUTZ-FAHR DEUTSCHLAND GmbH, D-89415 Lauingen, www.deutz-fahr.de
EVOLVING AGRICULTURE.