Ad 45 Posted April 3, 2013 Share Posted April 3, 2013 Today i purchased Polish Airport's vol.3 for FS2004 because there was a Sale. I also downloaded the update to v.1.8 and activated AES for these 3 airports. But at EPWR at apron 2 the gates 8 to 12 are missing a part between the gates and the building. Within AEShelp v.2.30 i did a resync/repair but that didn't work. Still the same problem. I hope someone can help me. Regards, Ad Link to comment Share on other sites More sharing options...
Ad 45 Posted April 18, 2013 Author Share Posted April 18, 2013 I can't imagine that i'm the only one with this problem. I hope that a FS2004 Polish Airport vol.3 and AES user want to check his situation at this airport at gate A8 to A13. Many thanks. Ad Link to comment Share on other sites More sharing options...
goldfisch 33 Posted April 19, 2013 Share Posted April 19, 2013 You are not the only one with this problem. It's the same for me since I purchased the scenery two weeks ago. I just didn't post it because you did it before. So there is obviously nothing else to do for us than to wait for Oliver's next visit here in the forums as some other people do... Jens Link to comment Share on other sites More sharing options...
Ad 45 Posted April 20, 2013 Author Share Posted April 20, 2013 Jens, thanks for your reaction. I've also sent e-mails to Aerosoft Support starting about 10 days ago but i only got some questions about my system and version of AES, but still no solution. Indeed, you're right, we have to wait for Oliver. But it's very quiet around him last weeks! Ad Link to comment Share on other sites More sharing options...
Jorn 1 Posted April 20, 2013 Share Posted April 20, 2013 Hei, Have the same issue. Just checked. Sure there is a update on the way soon. Regards Jorn Link to comment Share on other sites More sharing options...
Ad 45 Posted May 21, 2013 Author Share Posted May 21, 2013 Hello Oliver, I saw you were back again here after 7 weeks. So i missed you. Perhaps you want to look at my/our problem. I've attached two pictures, one from EPWR with AES activated and one from EPWR without AES. I had e-mail contact with Shaun via support, but he told me that you're the only one who can solve this. I hope you've some time for an update. Many thanks in advance. Ad Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted May 22, 2013 Developer Share Posted May 22, 2013 When I have done this airport, all was fine. So there are two option possible: 1.) You have an older version of the airport then I used for the design 2.) I had the older version for the design and you have a newer version installed. I will check, if option 2 is present and if so, I will correct it next release. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted May 22, 2013 Developer Share Posted May 22, 2013 Have doublecheck this and could not reproduce this issue. AES based on the FS2004 Installer for PAv3 V1.0 provided by Aerosoft. Maybe there is a difference between the Aerosoft Version and the Version provided by Drzwiecki Design directly. Link to comment Share on other sites More sharing options...
Ad 45 Posted May 22, 2013 Author Share Posted May 22, 2013 Oliver, i purchased Polish Airports vol.3 at april 4 via Simmarket and the installer was the PAv3_FS9.exe Strange if there are two different installers. I will contact Drzewiecki Design about it. I didn't do that before because i thought it was AES related. I'll keep you informed. Many thanks anyway. Ad Link to comment Share on other sites More sharing options...
goldfisch 33 Posted May 22, 2013 Share Posted May 22, 2013 Hi Ad, would you please post the answer of the developers here for the other users? I also have the installer from simmarket. Thanks in advance, Jens Link to comment Share on other sites More sharing options...
Ad 45 Posted May 22, 2013 Author Share Posted May 22, 2013 Hi Jens, I'll post the reaction of Drzewiecki here as soon as i have one. Regards, Ad. Link to comment Share on other sites More sharing options...
Ad 45 Posted May 23, 2013 Author Share Posted May 23, 2013 Hi Jens, I got a reaction from Stanislaw of Drzewiecki-Design and he wrote: I have already contacted Oliver, we will try to fix that. That's good news, i think. Ad Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted May 27, 2013 Developer Share Posted May 27, 2013 So, here the workaround to make AES 2.30 compatible with the new FS9 Version of the Scenery in EPWR: - Just copy the File DATA_0414.FSX to DATA_0414.DAT within the <FS9>\Aerosoft\AES\DATA Folder and restart the FS9, then the jetways fits. Since Version 1.5, the layout of the scenery is the same as in FSX, so the FSX DAT file will fix the issue. In the next AES Verison I will include the support of the new Scenery versions automaticaly. Link to comment Share on other sites More sharing options...
goldfisch 33 Posted May 27, 2013 Share Posted May 27, 2013 Hi Oliver, thank you for the quick fix! Regards Jens Link to comment Share on other sites More sharing options...
Ad 45 Posted May 27, 2013 Author Share Posted May 27, 2013 Hi Oliver, As Jens wrote, many thanks for the quick fix! I'm not at home yet, but i'll try the fix as soon as possible. I'll keep you informed. Best regards, Ad Link to comment Share on other sites More sharing options...
Ad 45 Posted May 27, 2013 Author Share Posted May 27, 2013 Hi Oliver, And yes, that did the trick. Problem solved. Many thanks again. Great service. And i'm looking forward to v.2.31 of AES. Hope it will be released soon. Best regards, Ad Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.