TSQ (160315): Technical Specification Questionnaire for On-Line Sheet Measuring Instruments Type SRM-50 or OD-1x or CRT series
To provide a detailed proposal we need some basic information about your application. By providing this information we`ll be able to offer the best possible solution for your application.

Please answer as many questions as possible. If a question is not relevant for your application please skip it.

(C) Copyright NAGY Messsysteme GmbH. All rights reserved.
Sign in to Google to save your progress. Learn more
1)   Ohm/sq: please select measuring range *
Every selected measuring range means 1 extra measuring channel => more space needed & higher costs
Required
1a) OD (optical density) - please select needed measuring range *
Following standard ranges are available: higher range  => higher costs
1b) OD (optical density): please select one of the following available wave-lengths *
Following standard wave lengths are available:
Required
2) Substrate *
Specify the type of subtrate which coated with the conductive layer
Required
3) Type of Coating *
Select the typical coating
Required
4) Substrate Transport Direction *
To evaluate the mechanical strength of the frame specify the transport direction of the substrate
5) Substrate Speed in Machine Direction (MD) at planned installation position *
Enter speed in m/sec or m/min - please include unit in your answer (e.g. m/sec)
6a) Substrate Format *
6b) Substrate Dimensions *
In case of roll-to-roll specify the length in m (meter) / In case of non-continous please specify length and width in cm (120 x 60 cm)
6c) In case of uncontinous substrate (e.g. glass panes): gap between 2 pieces *
This is importent to evaluate if there is enough space between 2 samples to make a ZERO-calibration from time to time
7) Awaited waving of substrate (fluttering) *
+/-  mm from nominal position
8) Needed distance from the left and right edge of substrate to the frame (holder) supporting the measuring heads (sensors) *
Or in other words: how close to the substrate's edge can a mechanical frame be installed ?
9) Number of requested channels across the substrate *
How many measuring heads do you like to have in cross direction ? More channels => higher resolution in cross direction => higher costs
10a) Ambient temperature at planned installation position *
10b) Substrate temperature at planned installation position *
Note: the substrate's temperature may influence the resistance.
11) Athmosphere or Vacuum ? *
The measuring system shoud be operated in
12) Available space for measuring system *
If possible please describe the available space situation of the possible (planned) installation position. The picture below shows a typical setup of vacuum coating machine (cross direction  +  machine direction).
13) Visualization of the readings *
Who makes the data visualization (monitoring), data logging ?
14) Data communication interfaces *
RS-232 is standard Others are optional:
15a) Company *
Please provide your company's name
15b) Company website *
If your e-mail address'  domain is different from your company web-site' address (e.g. Google or Yahoo address)
15c) Contact person *
Mrs / Mr  John DOE     - given name in lower case letters and SURNAME IN CAPITAL LETTERS
15d) E-mail address of contact person *
15e) Telephone number of contact person* *
Include country code - example: +1 123 456 879   or +49 711 123 456
16) Additional information *
Type any information you want to share with us which may be helfpul to understand your application
Submit
Clear form
Never submit passwords through Google Forms.
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Privacy Policy
Google Forms