20C Baseband with 10D Radio
SMS Send Bug Fix
!!d800 Only!!
SMS Send Bug Fix
!!d800 Only!!
Edit (2015.05.12) - I have dumped and posted d80020y modem to my website. It seems that 20y might have fixed this issue. I have been using it for a day or so now and have not noticed this bug. You may wish to try that modem before this one.
I have tried multiple ROMs with the KK Modem as well as the KK-AOSP Modem. In all instances, when using the radio contained within the new KK Modem, my SMS messages would randomly get 'stuck' for lack of a better word. I posted a Q&A thread on this issue and had a couple of responses indicating the same issue, even on stock KK.
Therefore, in my quest to fix this, I contacted dr87 about how the AOSP patched modems were created. Based on his (very quick) response, I decided to create my own patched modem.
This modem is compatible with KK based ROM (e.g. CloudyPro II). However, instead of keeping the KK radio, which seems to cause issues, I patched the modem with the 10D radio.
This yields the best of both worlds. All sensors seem to be working correctly in KK. Also, I have not had any SMS messages get 'stuck' since this uses the old, good, radio.
I only created this last night! It flashed and works great on my phone. Flash at your own risk.
Also, I flashed with TWRP.
D800 ONLY
Major Thank You to dr87!
TL;DR:
Problem: ROMs that require the KK Modem (for rotation to work) cause SMS messages to randomly get stuck, causing ~2 minute delay when sending.
Solution: Use this patched modem.
Download:
https://www.gregtwallace.com/lg-g2/d800-modems/
(It is the Modded One - Baseband: D80020C; Radio: D80010D)
Install:
1) Copy .zip and .md5 to the root of your sdcard.
2) Reboot into TWRP.
3) Install -> Select .zip File.
4) Check "Zip file signature verification." (File is properly signed.)
5) Swipe to install the zip. (MD5 and Signature should verify and modem should install.)
6) Wipe cache/dalvik (for good measure.)
7) Reboot System and Enjoy!
Note: In "System Settings" under "About Phone" -> "Software Information" the Baseband version will be listed as ending in ".190034". This is the 10D baseband.
10D & 10O Baseband Rev: M8974A-AAAANAZM-1.0.190034
Default KK Baseband (20c) Rev: M8974A-AAAANAZM-1.0.190082
This Patched KK Baseband Rev: M8974A-AAAANAZM-1.0.190034
Please respond with any issues, etc.
Shameless plug for donations:
Venmo Preferred (No Fee)
Zelle, send to greg@gregtwallace.com
Backup (Charges Fee)
Paypal
Last edited: