Mar
31
A New Magnetic Material for Transformers
March 31, 2016 | 1 Comment
Sandia National Lab engineers have developed a way to make a magnetic material that could lead to lighter and smaller, cheaper and better-performing high-frequency transformers. High-frequency transformers are needed for more flexible energy storage systems and widespread adoption of renewable energy.
The new iron nitride transformers developed at Sandia should boost energy storage options. Sandia manufactures the iron nitride (γ’-Fe4N) powders by ball-milling iron powders in liquid nitrogen and then ammonia. The iron nitride powders are then consolidated through a low-temperature field-assisted sintering technique (FAST) that forms a solid material from loose powders through the application of heat and sometimes pressure.
The FAST manufacturing method enables the creation of transformer cores from raw starting materials in minutes, without decomposing the required iron nitrides, as could happen at the higher temperatures used in conventional sintering. Previously, the γ’ phase of iron nitride has only been synthesized in either thin-film form in high-vacuum environments or as inclusions in other materials, and yet never integrated into an actual device.
Sandia National Laboratories researcher Todd Monson and his colleagues have demonstrated the fabrication of iron nitride transformers in power-conversion test beds. Image Credit: Randy Montoya. Click image for the largest view.
Sandia researcher Todd Monson of Nanoscale Sciences Department, who led the team with Stan Atcitty of Sandia’s Energy Storage Technology & Systems Department explained, “FAST enables the net-shaping of parts, meaning that iron nitride powders can be sintered directly into perfectly sized parts, such as transformer cores, which don’t require any machining.”
The technology would allow for transportable energy storage and power conversion systems, which could fit inside a single semi-trailer, making it cost effective to rapidly install solar, wind and geothermal energy systems in even the most remote locations.
“Such modular systems could be deployed quickly to multiple sites with much less assembly and validation time,” said Monson. Using this method could make transformers up to 10 times smaller than they are currently.
Due to its magnetic properties iron nitride transformers can be made much more compact and lighter than traditional transformers, with better power-handling capability and greater efficiency. They will require only air cooling, another important space saver. Iron nitride also could serve as a more robust, high-performance transformer core material across the nation’s electrical grid.
So far, Monson and his colleagues have demonstrated the fabrication of iron nitride transformer cores with good physical and magnetic characteristics and now are refining their process and preparing to test the transformers in power-conversion test beds.
Atcitty noted, “Advanced magnetic materials are critical for next-generation power conversion systems that use high-frequency linked converters, and can complement Sandia efforts in ultra-wide bandgap device materials for improved power electronics systems. They can withstand higher frequencies and higher temperatures, which ultimately result in high power density designs.”
Monson, Atcitty and their team built on Sandia’s expertise in power electronics and magnetic materials in strong collaborations with University of California, Irvine, and Arizona State University researchers, who helped with materials processing and systems-level modeling.
Team members from Sandia and UC Irvine have filed a patent application for the materials synthesis process.
Imre Gyuk, Energy Storage program manager in the DOE’s Office of Electricity Delivery and Energy Reliability said, “Power electronics represents a substantial cost factor in an effective energy storage system.”
Folks give little thought to power transformers. But they are everywhere from giant ones at power stations to middle sized ones at substations, small ones for the homes and businesses in the neighborhood to little ones for doorbells and HVAC thermostats and tiny ones for wall warts charging up everything to micro ones in computers, cell phones and about everything electronic.
Transformers are crucial for the modern world we live in. More better cheaper and longer lasting is a great thing in this field.
Comments
1 Comment so far
Feedburner
Reddit
Stumbleupon
This could TRANSFORM the electrical grid. 😉