Pvc Toddler Chair

First off, This is my first instructable. This isnt my original idea but i haven't ever came across an instructable for how to make this so i decided to make one to share with every one. the original instructions that i found was on one of the first links on google after searching "pvc toddler chair" they also have instructions on how to make the actuall sling part of it that the kids sit in but im not guna add that part just pictures of it(plus the wife is guna sew them not me lol) ok well here we go

Ok im not sure what the price pn pvc pipe is because i salvaged them. The Ts and elbows i bout at lowes you can get 10 pack cheaper that you can buying 10 seperate they cost about $2-$3 per pack. Ok pretty much all you need : pipe, Ts, elbows, and if you want some pvc cement but i didnt use it.

Materials are:
Atleast one 10x1/2 pipe
8 1/2x1/2 elbows
6 1/2 T fittings
Pvc pipe cutter or a saw
Pvc cement(optional)

Ok your cuts dont need to be perfect, i used a saw so mine definitely werent, there wont be any exposed cut parts all ends will have dittings on it, If you want to make multiple chairs you will need more pipe, one 10ft pipe is enough for one chair you will only have about 1 1/2in pipe left over after you cut everything.

Cuts you will need to make:
7 10in pieces
2 6in pieces
4 5in pieces
4 4in pieces

Start with your 7 10in pieces, make 3 with elbows on both sides, 2 with Ts on both sides and 2 with an elbow on one side and a T on the other

Now that you have youre fittings in place grab your 4 5in pieces and your 2 6in pieces there should be 2 pieces with the 5in pipe on both sides and one with the 6in pipe on both sides i refer to these as "u"shaped parts

Now what you want to do is get the 2 double T ended pipe and connect one T to one end of the 5in "u" shaped pipe you put together earlier, then grab your 2nd 5in "u" shaped pipe and connect it to the other T, do the same thing for the opposite side. And it makes youre base

Now what you want to do is add your 4 4in cuts to each T

Once you have youre 4in pipes connected grab the 2 parts with an elbow and T on the sides and connect it to the 4in pipe like in the picture, this makes the arm rest part of the chair.

Now all you're left with is the one 6in "u"shaped part, connect it to the last 2 open T fittings and you have you back rest. And youre done you can get some spray paint for plastic and paint it whatever color you want

Heres the pictures of the sling part that were with the original instructions so you can make your own, seems pretty simple.
And thats it pretty simple project takes about 30mins well enjoy making your pvc toddler chairs!